What to do when Garage Door Torsion Spring Repair breaks

The modem garage door is the largest moving system in most homes. It has some three hundred components. Among them, the torsion coil trampoline spring plays a major role. It is loaded with torque whose amount is equal to the weight of the door. In this way, the component works to counterbalance the entire door and to provide the torque necessary for its opening. Given the hard work that it does, the spring has a high rate of wearing. This is just one of the possible causes of issues with this component.

Garage Door Torsion Spring

Repair for Malfunctioning Overhead Door Springs

Problems with the spring are usually easy to recognize. A strange scraping sound coming from above the door while it is opened and closed is an indicator that something is wrong with the component. A quick visual inspection can reveal all sorts of damage from rust, scratches and scraping to deformation and chipping. If you notice any of these bothering signs, report the issue to us to get fast and dependable garage door repair

Most often, a spring is noisy because it has gotten dry and there is greater friction. This problem is resolved with cleaning and lubrication. If the component has gotten rusty, the rust is removed with a safe yet potent product. Then, lubricant is applied. When the damage is beyond repair, then the spring is replaced with a new one that has the same specifications. This is the solution in case of deformed coils, for instance.

Broken Torsion Spring Replacement Ventura

Each spring comes with an estimated cycle life based on its size, design and make. The average component of this type can perform 10,000 cycles consisting of one opening and one closing before it breaks. When this happens, a loud bang is produced as the torque is released and the door becomes completely stuck. In this situation, you mustn’t operate the door, either with the opener or manually. Count on us for fast garage door spring replacement

It is also possible for the component to be replaced as part of preventive maintenance when it has got extensively worn and is near the end of its useful life. In this way, the inconvenience and the safety risks associated with a broken spring will be prevented.

Garage Door Adjustment Ventura

When the spring is not loaded with the optimal amount of torque, this will also create issues. If there is more force than necessary, it will be hard to keep the door closed. You may have to lock it. When there is too little force, the door will be extremely challenging to lift. It is easy to test the door’s balance. You simply need to detach the garage door opener and lift the door until it is halfway open. When the unit is released, it should stay in place. If it drops down or shoots up, spring adjustment will be required. Let us do this job quickly and professionally. With an optimal amount o force, both the spring and the door will work reliably

Keep visit, The Garage Door Doctor, Your one-stop-shop for all your garage doors repair and Installation services in Ventura, Camarillo, Oxnard, Simi Valley, Thousand Oaks and all of Ventura County.